Abstract
LF16 aluminum alloy and Q235 steel were brazed by Zn-Al solder and the Al-Si-Cu solder. Metallographic microscope and scanning electron microscope were used to observe the microstructure of weld joint. The result shows that the strength of the joints, which were welded with Zn-Al solder reached 133.6Mpa. Zn-rich solid solution phase and Al-rich solid solution phase existed in Zn-based solder brazing seam. The Fe element trend was gradual changed, while Al element trended more gently, and generated Fe2Al5 intermetallic compounds in the joints in both the brazing joint of Zn-based and Al-based solder.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.