Abstract
The microstructure and mechanical properties of AA5013 aluminum alloys prepared by strain-induced melt activation (SIMA) process were studied to investigate the effects of cold working and heat treatment conditions. The specimens subjected to deformation ratios of 30 and 50% and various heat treatment time and temperature regimes were characterized in the present study. The results revealed that for the desired microstructure of the alloy, the optimum heat treatment temperature and time were 650 °C and 60 min, respectively, for both deformation ratios. However, the specimens with 50% cold working exhibited more brittle behavior while they contain finer grains with uniform distribution along the cross-sections as compared to 30% cold working.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.