Abstract
The study examines the mechanical performance of GNP/PLA nanocomposite developed under varied SPS process parameters. The samples were fabricated using a novel Spark Plasma Sintering technique. In this research, the effect of sintering process in terms of sintering pressure and temperature has been studied by focusing on the mechanical properties of GNP/PLA nanocomposites. The densification of the samples was obtained via the Archimedes’ principle while hardness results was obtained using the micro hardness tester. The results show that the density and hardness increased with increasing sintering temperature and pressure. The samples were prepared under uniaxial pressure of 20 MPa and 30 MPa. The sintering temperature of 135 °C and 160 °C was used in developing the samples. The synergetic influence of these process parameters and graphene inclusion was significant in obtaining above 99% densification and with a concurrent enhancement in the hardness property of the developed composite.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: IOP Conference Series: Materials Science and Engineering
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
