Abstract
Bio-oils derived from waste wood resources are thought to be potential alternatives for petroleum asphalt binders used in asphalt pavement. This study aims to evaluate the effect of bio-oils on asphalt mixture performance after blending bio-oil (5% and 10% by weight, respectively) into the traditional asphalt binder. Three types of bio-oils are used – the original bio-oil (OB), dewatered bio-oil (DWB) and polymer-modified bio-oil (PMB). The asphalt pavement analyzer (APA) test, four-point beam fatigue test, dynamic modulus (|E*|) test and indirect tensile (IDT) strength test were conducted to evaluate the rutting resistance, fatigue performance, dynamic stiffness, and tensile strength, respectively. The test results showed that the addition of bio-oils significantly improves the asphalt mixture fatigue performance, has no significant effect on the rutting performance and dynamic modulus, but slightly impacted the tensile strength. In addition, polymer in the bio-oil was observed to improve the asphalt mixture performance as the PMB modified asphalt mixtures performed better than the two other mixtures. Further, statistical analysis on the laboratory test results are conducted and found to be consistent with the findings above. The study shows that the bio-oils derived from waste wood resources can be a good extender and modifier for petroleum asphalt binders in the pavement industry.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
