Mechanical Grinding of Hydroxyapatite and Its Interaction with Titanium

Abstract

The development of promising biocompatible composites based on hydroxyapatite with a metallic component is of great interest to researchers. This article describes the synthesis of hydroxyapatite powder by the hydrolytic method and presents the results of mechanical grinding of hydroxyapatite powder. Additionally, in order to study the interaction between titanium and hydroxyapatite powders, the results of their thermal treatment in the temperature range of 600–900 °C are presented. As a result of the hydrolytic method, a powder consisting of Ca5(PO4)3(OH) and CaO phases with a fraction of 400–600 μm was obtained. According to the results of mechanical grinding, it was determined that with an increase in grinding time from 30 to 120 min, the intensive main diffraction lines corresponding to hydroxyapatite decrease. During the thermal treatment of titanium and hydroxyapatite powders, titanium oxidizes forming suboxides and titanium dioxide (TiO2). At higher temperatures, the hydroxyapatite phase disappears from the mixture, and titanium oxide, calcium phosphate compound, and small amounts of calcium titanate and titanium hydrophosphate are present.