Mechanical characterization & regression analysis of Calamus rotang based hybrid natural fibre composite with findings reported on retrieval bending strength

Abstract

Research on Bio-based natural fiber material promoted the development of reinforcement and expand their possible structural applications. In this study, fibers are extracted from the stem of Calamus rotang (common rattan-Indian Species). Further, the fiber is processed to get novel hybrid combinations with glass fibers by manual hand lay-up technique. Three sets of samples were prepared for the different volume fractions of 60:40, 30:30:30, and 60:32:8 of glass fiber/epoxy as neat composite sample (NCS), a hybrid combination of C. rotang /glass fiber with epoxy as modified reinforced composite sample (MRCS) and glass fiber/epoxy with calamus stem powder as modified matrix composite sample (MMCS) respectively. Mechanical tests including tensile, flexural, impact, and ILSS tests are conducted as per ASTM Standards. Comparative studies have been done to evaluate the effect of novel species of C. rotang on mechanical properties with neat GFRP composites. Addition to this regression analysis has been carried out to achieve the experimental correlation for tensile and bending tests. Microstructural analysis for all the tested samples has been done to assess the fracture mode. Novel findings on retrieval bending strength for MMCS has been reported for the first time for composite materials. Study proves that novel species have a significant impact on the basic properties of materials.