Mechanical Characterization of Soft Membranes with One-Shot Projection Moiré and Metaheuristic Optimization

Abstract

Mechanical characterization of soft materials is a complicated inverse problem that includes nonlinear constitutive behavior and large deformations. A further complication is introduced by the structural inhomogeneity of tested specimens (for example, caused by thickness variations). Optical methods are very useful in mechanical characterization of soft matter, as they provide accurate full-field information on displacements, strains and stresses regardless of the magnitude and/or gradients of those quantities. In view of this, the present study describes a novel hybrid framework for mechanical characterization of soft membranes, combining (i) inflation tests and preliminary in-plane equi-biaxial tests, (ii) a one-shot projection moiré optical setup with two symmetric projectors that project cross-gratings onto the inflated membrane, (iii) a mathematical model to extract 3D displacement information from moiré measurements, and (iv) metaheuristic optimization hybridizing harmony search and JAYA algorithms. The use of cross-gratings allows us to determine the surface curvature and precisely reconstruct the shape of the deformed object. Enriching metaheuristic optimization with gradient information and elitist strategies significantly reduces the computational cost of the identification process. The feasibility of the proposed approach wassuccessfully tested on a 100 mm diameter natural rubber membrane that had some degree of anisotropy in mechanical response because of its inhomogeneous thickness distribution. Remarkably, up to 324 hyperelastic constants and thickness parameters can be precisely identified by the proposed framework, reducing computational effort from 15% to 70% with respect to other inverse methods.