Abstract
In the present paper an investigation of mechanical behaviour and thermal conductivity of a lightened building material containing either styrene butadiene rubber (SBR) or polyurethane (PU) waste particles or scraps coming from wasted rubber-shoe outsoles (SR, acronym of ‘sole rubber’) is presented. Several mortar mixtures were prepared by replacing quartz sand with 0%, 10%, and 30% of either SBR or PU or SR waste particles. The influence of rubber particle addition on fresh mortar behaviour, compressive and flexural strength of mortar as well as on mortar thermal conductivity was detected. An optimization of mortar mixture proportions was carried out by adding a limestone powder as filler. The experimental investigation showed that the addition of rubber particles reduces both the material unit weight and the thermal conductivity. The thermal insulating effect of rubber particles indicates a high and promising potential for future developments. On the other hand, the addition of limestone powder produced higher thermal conductivity as well as higher compressive and flexural strength.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.