Abstract
The mechanical behavior of polymer–matrix composites unidirectionally reinforced with carbon or glass fibers subjected to compression perpendicular to the fibers was studied using computational micromechanics. The stress–strain curve was determined by the finite element analysis of a representative volume element of the microstructure idealized as a random dispersion of parallel fibers embedded in the polymeric matrix. The dominant damage mechanisms experimentally observed – interface decohesion and matrix plastic deformation – were included in the simulations, and a parametrical study was carried out to assess the influence of matrix and interface properties on the stress–strain curve, compressive strength, ductility and the corresponding failure modes. It was found that the composite properties under transverse compression were mainly controlled by interface strength and the matrix yield strength in uniaxial compression. Two different fracture modes were identified, depending on whether failure was controlled by the nucleation of interface cracks or by the formation of matrix shear bands. Other parameters, such as matrix friction angle, interface fracture energy or thermo-elastic residual stresses, played a secondary role in the composite mechanical behavior.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.