Abstract

In this study, graphene oxide (GO) was prepared by an improved Hummers’ method, and the graphene oxide–carbon fiber (GO-CF) hybrid fibers were prepared by electrophoretic deposition (EPD) with the above GO. The microstructure and mechanical properties of GO, CF and GO-CF cement matrix composites were studied by X-ray diffraction (XRD), SEM and mechanical tests. X-ray diffraction (XRD) and SEM results showed that the surface modification of CF with GO could effectively improve the dispersion of CF in the cement matrix, the template action of GO providing nucleation sites for cement hydration, which significantly enhanced the interface bond between CF and the cement matrix. The mechanical properties test results showed that the early compressive strength and flexural strength of cement matrix composites were significantly improved by GO. Adding CF into the cement matrix significantly improved the flexural strength, although the compressive strength was not improved, even exhibiting a downward trend when the CF content exceeded 0.5%. The flexural and compressive strength of GO-CF cement matrix composites were clearly improved, its 7 d flexural strength and compressive strength increased by 30.89% and 17.56%, respectively, and its 28 d flexural strength and compressive strength increased by 38.37% and 14.32%, respectively. The research results indicate that a new method was provided which used GO as a dispersant and surface modifier to improve the dispersion of chopped CF in a cement matrix, and the interaction between CF and the cement matrix interface could also be applied to the functional aspects of cement matrix composites.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call