Abstract

The aim of this study was to investigate the behaviour of a new type of lightweight concrete which would be suitable for use as a load-bearing concrete masonry unit. Different ratios of by-product materials which consist of metakaolin (MK) and recycled glass were used in conjunction with expanded clay to produce the lightweight concrete mixtures. The short and long-term mechanical properties and thermal criteria were measured using a total of 208 specimens with different geometries. Some statistical analysis was conducted and the obtained results were compared with the standard expressions.The tests results showed that it is possible to produce a structural lightweight concrete possessing good thermal properties using by-product materials. Compressive and splitting tensile strengths, as well as the modulus of elasticity, increased with an increase in the metakaolin content, whilst a counteractive behaviour was recorded for the density. Clear improvements in thermal conductivity and insulation criteria were observed in comparison with conventional lightweight concrete mixtures. The measured thermal conductivity values ranged from 0.092W/mK to 0.177W/mK, and the insulation criterion reached up to 110.25min for 29mm concrete member thickness.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.