Abstract
The paper presents studies of influences of platelet-shape alumina content on the morphology, mechanical and thermal properties of Al2O3/epoxy composites. The alumina particles were pre-treated with surface modifier, and its addition contents were ranged from 17 to 40vol.%. It was found that tensile strength and thermal conductivity increased with the increase of the alumina contents. The fracture surface investigation showed that several strengthening mechanisms, including particles pull-out, crack pinning, plastic void growth and deformation were the main factors for the increments of the tensile strength of the Al2O3/epoxy composites. Comparing with pure epoxy polymer, the creep strain values at 70 °C for 1800 s and recovery strain after 3600 s of 40vol.%Al2O3/epoxy composites was lower as 0.23% and 70%, respectively. It was due to effective prohibition of the slippage and disentanglement of epoxy polymer molecules by the rigid Al2O3.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
