Abstract
AbstractRecent advances in the development of high‐performance insulating composite materials have created a new trend in the construction industry for the production of optimized lightweight structural sections. Although such sections are often found to have enhanced strength‐to‐weight ratio, their lower fracture resistance and toughness are commonly known to prone lightweight concrete sections to brittle failure with a low capacity to withstand crack propagation. To address this, in this study, six mixes containing lightweight expanded clay aggregates with a small quantity of hooked steel fibers ranging from 0 to 1.15 vol% are produced. As a result, it is found that the inclusion of steel fibers at 1.15 vol% can increase fracture energy and characteristic length by about 20 and 11 times, respectively. The result of this study is found to be significant and point to the development of highly ductile, structural‐grade lightweight fiber reinforced concrete through the use of hooked steel fibers.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.