Mechanical and electromagnetic interference shielding properties of natural fiber reinforced polymer composite with carbon nanotubes addition

Abstract

AbstractMechanical and electromagnetic interference (EMI) shielding properties are investigated for developed synthesized green composite. The varying content of kenaf fiber‐reinforced high‐density polyethylene (HDPE) composite has been fabricated using microwave‐assisted compression molding techniques with and without the addition of multi‐walled carbon nanotubes (MWCNTs). X band range has been used for EMI shielding characterization. Optimization for mechanical strength has been done using tensile test, impact test, and translaminar fracture toughness test. Fractography by scanning electron and optical microscopy concluded that interfacial adhesion between kenaf fiber and HDPE matrix and the degree of ductility of the matrix are primary governing factors for change in mechanical properties. The differential scanning calorimetry confirmed no change in the degree of crystallization of the matrix with the addition of MWCNTs. Composite with EMI shielding effect above 30 dB along with superior mechanical properties is obtained at 16% (v/v) kenaf fiber content with the addition of 5% (wt.) conductive MWCNTs for possible application in electronic equipment casing, overhead bin, or unmanned aerial vehicles.