Mechanical and Durability Performance Improvement of Natural Hydraulic Lime-Based Mortars by Lithium Silicate Solution.

Abstract

Natural hydraulic lime (NHL) as a building material has been widely used to restore the historic structure. However, the slow growth rate of strength and durability limits its engineering application. In this work, the NHL-based mortars were pretreated by lithium silicate (LS) solution impregnation and surface spraying. The results show that the compressive strength, surface hardness, and freeze-thaw cycle (FTC) resistance of NHL-based mortar were greatly improved after LS pretreatment. Specifically, the compressive strengths of the sample increased by about 32.7–52.0%. LS was sprayed on the sample’s surface (about 0.2 kg/m2) and the surface hardness increased by up to 10 grades. Compared with the control samples, the weight loss of treated samples decreased by about 31.6–43.8%. A rehydration process to generate the hydrated calcium silicate gel (C-S-H) was observed between calcium hydroxide (CH) and LS, which can decrease the sample’s porosity and form a silicate coating on the surface. With an increase in the concentration of LS, the macropores (50–10,000 nm) content decreased, while the mesopores (10–50 nm) and nanopores (less than 10 nm) increased. This work reveals that the LS pretreatment provides a potential route to improve NHL-based mortar’s mechanical properties and durability.