Abstract
AbstractThe PA6G blue is a polymeric material for great versatility of engineering applications that required good mechanical and tribological properties such as gears. The focus of this study was to investigate the mechanical properties as well as the friction and wear resistance of a commercial PA6G blue under biodegradable external lubrication, to evaluate its potential use for gear applications. Firstly, the PA6G blue was characterized by FTIR analysis in order to identify the characteristic chemical groups of this polymer. The mechanical characterization was performed by tension and hardness tests according to the standards ASTM D638 and ASTM E10, respectively. Subsequently, friction tests were carried out on a tribometer with pin-on-disk configuration based on the ASTM G99 standard, in dry and lubricated conditions. Natural castor and canola oils were employed as bio-lubricants, as well as their mixture at 50% by volume. The results exhibited that the PA6G blue exhibit good mechanical performance as that required by gear fabrications. Besides, the friction performance showed a low friction coefficient of 0.11 in the dry condition that decreased about 50% in lubricated tests, obtaining a friction coefficient value of 0.054.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
