Mechanical, Acoustic and Thermal Performances of Australian Hempcretes

Abstract

AbstractThis paper is investigating the performance of Australian hemp in hempcrete including unretted and retted hurd and fines for wall and render applications, respectively. The mechanical, thermal and acoustic characteristics of hempcrete are assessed including the effect of retting process. Although the retting process caused about 12% decrease in shiv bulk density, which was attributed to the degradation of hemp and a lower solid volume fraction, hempcrete bulk density, mechanical characteristics, thermal conductivity and acoustic performance are not significantly influenced by the retting process. The thermal conductivity appears to be proportional to the bulk density which is proportional to the hemp content of hempcrete. Acoustic performance of wall mix specimens was outstanding with a maximum sound absorption coefficient around 0.90 for a frequency around 700 Hz. However, the acoustic performance of render mix specimens was extremely poor compared to that of wall mix specimens with a sound absorption coefficient less or equal to 0.13. The combined effects of fine particle size and high binder content is responsible for this drastic drop in sound absorption coefficient. Acoustic performance was much more impacted than thermal conductivity by the hemp fine particle size and high binder content of the render mix.KeywordsHemp concreteBio-aggregatesThermal performanceAcoustic performanceMechanical characteristics