Abstract
AbstractThe effect of jute, kenaf, and banana fiber reinforced epoxy hybrid composites with different stacking sequences were fabricated by compression molding techniques. The pure epoxy, pure jute, pure kenaf, pure banana composites are also fabricated for comparison purposes. Tensile, flexural, inter‐laminar shear strengths, and hardness properties of the fabricated composites were investigated. Physical parameters like density, water absorption, and thickness swelling were also examined. From mechanical properties, the results are evident that when compared to hybrid composites pure banana composites have the highest tensile, flexural, interlaminar shear strength and shore D hardness value of 41, 67, 18, and 86 MPa respectively. Also, pure banana composites have better water absorption and thickness swelling percentage of 4% and 1.6%. However, KBJJBK hybrid composites exhibit a maximum tensile strength of 34 MPa, flexural strength of 54 MPa. Further BJKKJB hybrid composites possess the highest hardness value of 87, intralaminar shear strength of 17 MPa and lowest water absorption of 8% and thickness swelling percentage of 2%. Certain pure and hybrid configuration have enhanced mechanical strength, stiffness, and lower water absorption and thickness swelling properties, indicating that they are suitable for automotive structural applications.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
