Measurements of the soot volume field in laminar diffusion flames at elevated pressures

Abstract

Soot volume fraction ( f v ) is measured quantitatively in a laminar diffusion flame, with either methane or ethylene as fuel, at elevated pressures up to 2.5 MPa in order to gain a better understanding of the effects of pressure on the soot formation process. Soot continues to be of interest because it is a sensitive indicator of the interactions between combustion chemistry and fluid mechanics and known to be detrimental to human health. To examine the effects of increased pressure on soot production, laser-induced incandescence (LII) is used to obtain the desired spatially resolved measurements of f v as the pressure is incrementally increased to 2.5 MPa. The effects of pressure on the physical characteristics of the flame are also observed. Using a laser light extinction technique, the path-integrated soot volume fraction scales with pressure as p 1.0 and p 1.2 for the methane–air and ethylene–air flames, respectively, at 65% of the flame height. From the LII images, it is observed that the soot layer radius decreases with increasing pressure, scaling as approximately p −0.5 at 65% of the flame height, for both methane and ethylene flames. The local peak f v is found to scale with pressure as p 1.2 for methane and p 1.7 for ethylene flames, which is different than the path-integrated soot pressure dependence. The location of peak soot is observed to move from the edges toward the tip of the flame as the pressure is increased for both fuels.