Measurements of forelimb claw dimensions in cows using a standardised sole thickness: A post-mortem study

Abstract

Measurements of both front feet of slaughtered German Simmental cattle (17 heifers, 13 cows) were carried out to document the normal shape and size of the forelimb claws and to gain information about function and possible predisposition to disease. Only clinically normal feet were examined, and a standardised sole thickness of 5mm at the tip and 8mm in the heel region in both claws was established as a reference. The dorsal wall length, dorsal wall angle, heel length, height and width, sole and claw length and claw width, sole circumference and sole area were measured. After removal of the horn capsules, measurements of values at the level of the corium were carried out. The lateral front claws were wider and the medial claws longer than their partner claws. Overall, the sole surface areas and circumferences of the paired claws were similar, but were statistically larger in the medial claws. The front claws were characterised by long and high heel bulbs, and had a toe length:heel bulb length ratio of approximately 1.6:1. These properties, together with the musculo-tendinous attachment of the limbs to the trunk, are believed to provide better protection for the forelimb claws when standing or walking on hard surfaces. Functional mechanical relief of the medial front claws is probably best achieved by pairing the soles of the foot to the same level, which usually entails reduction of the lateral claw. For German Simmental cattle, a dorsal wall length of 75mm can be used as a guideline when trimming front and hind feet.