Abstract
One of the most important operations in the technological production process is the inspection of the manufactured product. The gradual wear of the tool affects the achievement of the required quality of the functional surfaces. In this research, we present the results of measuring the diameter deviation with a new generation laser triangulation sensor (LTS). At the same time, we have performed parametric optimization of several multi-responses, such as insert wear on the VBB flank side of cutting edge and diameter deviation Δd for a C45 steel sample during dry turning and using a sintered carbide insert, using the method of grey relational analysis (GRA) in combination with the Taguchi L16 orthogonal array. The optimal setting of input factors for multi-response parameters is ap 4-f 4-vc 1 i.e., depth of cut 0.5 mm, feed 0.4 mm per revolution, and a cutting speed of 70 m/min. At the same time, we present an evaluation of the significance of input factors using the method ANOVA.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
