Abstract

Operators of hand tractors are exposed to high levels of hand transmitted vibration (HTV). This vibration, which can be both irksome and hazardous to human health, is imparted to the operator via his or her hands and arms. However, a standardized method for measuring HTV of hand tractors has yet to be defined. The aim of the study was to present an experimental method for the investigation of the biodynamic response and vibration transmissibility of the hand-arm system during the operation of a hand tractor in a stationary mode. Measurements were performed with ten subjects using three grip forces and three handle vibration levels to examine the influences of the hand pressure and frequency on hand transmitted vibration (HTV). The results indicate that the tightness of grip on the handle influences the vibration response of the hand-arm system, especially at frequencies between 20 and 100 Hz. The transmission of lower frequencies in the hand-arm system was relatively unattenuated. In comparison, attenuation was found to be quite marked for higher frequencies during the operation of the hand tractor. The vibration transmissibility to different parts of the hand-arm system decreased with the increase of the distance from the vibration source. The proposed methodology contributes to the collection of consistent data for the evaluation of operator vibration exposure and the ergonomics development of hand tractors.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.