Measurement of the electron beam energy in a source with a plasma anode and the beam extraction into the atmosphere through a foil window

Abstract

Measurements of the energy of an electron beam in an electron beam source with an explosive-emission cathode, a plasma anode and a foil window, providing the extraction of an electron beam with a cross-section of (100–200) cm2 into the atmosphere, have been performed. The high voltage source was a Marx generator based long lines with matched loads. The energy values were calculated from the results of measurements of the temperature of a beam collector placed in vacuum using thermistors and an infrared imager. At an accelerating voltage of ~ 200 kV, a current of (1–2) kA, and an electron beam duration of 5 μs, the maximum values of the energy released in the collector with a cross section of 74 cm2 were (650–850) J/pulse. A decrease in the current and energy of the beam was recorded approximately by a factor of two after passing through an AMG-2n aluminum-magnesium foil with a thickness of 30 μm. The use of infrared imager for recording the beam structure in the plane of the output window in air has been tested.