Abstract
A fibre-optic technique was applied to measure the sound field in an ultrasonic cleaning vessel under practical conditions. A metal-coated fibre-tip is used as a sensor and a heterodyne interferometer detects the change in the optical path resulting from the movement of the fibre-tip in the sound field. Spectrally resolved sound field parameters such as the fundamental, the subharmonic or cavitation noise are extracted from the measurements and compared with results obtained by a piezo-electric hydrophone. It was found that the fibre sensor provides a signal related to the velocity in the sound field, but the information about cavitation-related parameters is similar to the information for pressure sensing techniques. The fibre-optic sensors have a uniquely high spatial resolution and the sound detection process is strongly influenced by single cavitation events close to the small fibre-tip.This paper shows that fibre-tip sensors are an alternative to common hydrophone techniques. They can open up new possibilities for measurement problems for which so far no solution exists, in particular when a high spatial resolution is required or when the measurement site is small.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
