Measurement of shallow defects in metal plates using inter-digital transducer-based laser-scanning vibrometer

Abstract

Scanning laser Doppler vibrometry (SLDV) is a promising method for visualizing defects in plate-like structures. The Lamb wave-based SLDV method using continuous excitations has been recently developed in nondestructive evaluation (NDE). In addition, various signal processing techniques have been developed to enhance damage detection capability for the method. To visualize defects, the A0 mode is commonly used because of its sensitivity to the thickness variations, i.e. the wave speed changes according to the thickness of a plate. The A0 mode is easily generated by lead zirconate titanate (PZT) transducers. However, for thick plates, the A0 mode is found to be less sensitive to thickness variations compared to thin structures. To address this issue, a mode-tuned inter-digital transducer (IDT) is adopted to efficiently generate and utilize the symmetric modes for damage detection and visualization of thick plates. Based on the wavelength of the S0 mode using the dispersion curve of the plate, the IDT is designed and fabricated for efficient symmetric mode generation. To evaluate the capability of the mode-tuned IDT-based SLDV, a 6-mm-thick plate (40 mm × 40 mm) with defects of 0.3 mm, 0.6 mm, 0.9 mm, and 1.2 mm depths is used. The S0 mode is selected for its wavenumber sensitivity and the degree of separation between modes. It is demonstrated that the detectability of shallow defects in a thick plate is improved compared to that when using the A0 mode.