Measurement of sensitivity to dynamic strain aging in C–Mn steels by internal friction experiments

Abstract

The dynamic strain aging (DSA) phenomenon is present in C–Mn steels and associated welds commonly used in many industrial applications. This phenomenon, which appears in metals containing solute atoms interacting with dislocations, induces an increase in flow stress and ultimate tensile strength (UTS) as well as a decrease in ductility. The DSA phenomenon was studied by tensile, strain rate sensitivity and internal friction tests between 20°C and 350°C in two C–Mn steels with very different sensitivities to DSA (a fully killed A42 steel and a semikilled A48 steel). The internal friction technique, which allows one to evaluate the balance between carbon and nitrogen atoms free in the lattice and carbon and nitrogen atoms interacting with mobile dislocations, appears to give results well correlated with those obtained by tensile (and strain rate sensitivity) tests. The ductility loss or the UTS increase is shown to be proportional to Snoek peak height. It is concluded that, even in industrial materials, a single internal friction test can give a good evaluation of DSA sensitivity.