Abstract
We describe a method to measure the concentration of 224Ra and 226Ra in the heavy water target used to detect solar neutrinos at the Sudbury Neutrino Observatory and in the surrounding light water shielding. A water volume of (50-400) m^3 from the detector is passed through columns which contain beads coated with a compound of manganese oxide onto which the Ra dissolved in the water is adsorbed. The columns are removed, dried, and mounted below an electrostatic chamber into which the Rn from the decay of trapped Ra is continuously flowed by a stream of nitrogen gas. The subsequent decay of Rn gives charged Po ions which are swept by the electric field onto a solid-state alpha counter. The content of Ra in the water is inferred from the measured decay rates of 212Po, 214Po, 216Po, and 218Po. The Ra extraction efficiency is >95%, the counting efficiency is 24% for 214Po and 6% for 216Po, and the method can detect a few atoms of 224Ra per m^3 and a few tens of thousands of atoms of 226Ra per m^3. Converted to equivalent equilibrium values of the topmost elements of the natural radioactive chains, the detection limit in a single assay is a few times 10^(-16) g Th or U/cm^3. The results of some typical assays are presented and the contributions to the systematic error are discussed.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.