Abstract
An experimental study is conducted to measure liquid-solid (L-S) contacts in film boiling of water under atmospheric pressure. The test specimens selected for the present experiments are a silver sphere (30 mm in diameter) and two kinds of silver cylinders (20 mm in diameter and 60 mm long). The heat transfer surface is coated with a thin, electrically insulating layer, and the impedance between the metal substrate and the boiling liquid is measured. This impedance is related to the average fraction of the heat transfer area which is wetted by the liquid. Direct L-S contacts are intermittently observed on local portions of the heated surface in saturated film boiling, and the frequency of contact ranges between 1.0 and 3.1 Hz. In subcooled boiling, however, the contact frequency becomes extremely low with a little subcooling.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.