Measurement of Inlet Drop Size Distribution of Secondary Dispersions by Laser Particle Size Analyzer

Abstract

Knowledge of the Oil drop size distribution, in addition to the mean drop size, is necessary in order to characterize secondary dispersions. Furthermore, the capture efficiency for any drop flowing through a packed bed depends upon its Oil inlet drop diameter. The Oil/Water secondary dispersions produced by the centrifugal pump were analyzed at regular intervals during an experiment to ascertain the drop size distribution and to check that the feed to the coalescence bed was consistent. New techniques that were developed for measurement of drop size distribution of secondary dispersions using Laser Particle Size Analyzer, which consisted of (He/Ne) laser emitter and laser receiver and lenses. The Laser Particle Size Analyzer was fixed directly to the experimental equipment by using the special designed circular cell. The measurement of drop size distribution was done by computer system with application software package. The new mean drop diameter (i.e., d 21) equation has been derived theoretically and the results that predicted from this equation exhibited a maximum error of ±15% from the experimental data.