Abstract
A technique for viscosity measurement was developed based on the principle of laser-induced surface deformation. Light incident into liquids increases its momentum due to the difference in refractive index and gives the surface an upward force as a reaction. The plane surface thus swells up and deforms, and the shape is determined so that the force is balanced with the surface tension and the gravity. On sudden laser irradiation, the deformation inevitably accompanies a viscous flow and exhibits a relaxational behavior with a delay time, which gives the viscosity. Theoretical prediction of the step-response function was given that takes surface tension waves excited by the laser into consideration. Nd–yttritium–aluminum–garnet laser with 0.6W output was focused to ∼200μm beam waist and used for the pumping. The deformation process was observed sensitively with another probe laser illuminating the activated area. This system was tested with the standard liquids for viscosity ranging from 1 to 106cSt. The results demonstrated the validity of this technique, though a correction for the inertia effect was needed in the range lower than 10cSt. Further, effect of the thermal expansion by a slight optical absorption was discussed. This technique is especially useful at high viscosities since the measurement takes only a few seconds even in the specimen with 106cSt. Besides the rapidity, it has a great advantage of a noncontact feature and is appropriate for measuring the liquids that strongly dislike contamination. It has also potential applications in industries, measurement of liquids isolated in a production line, for instance.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have