Measurement of Fast Neutron Induced Fission Cross Section Ratios of Pu-240 and Pu-242 Relative to U-235

Abstract

Fission cross section ratios of 240Pu and 242Pu relative to 235U were measured by using the 4.5 MV Dynamitron accelerator of Tohoku University. The measurement using mono-energetic neutrons was performed in the neutron energy range of 0.6–7 MeV with the time-of-flight method. Prior to the measurement, a fast timing back-to-back fission chamber was developed with good time resolution to reduce the backgrounds due to α-particles and spontaneous fissions. Furthermore, we took account of the effect of the nonuniformity of fission sample thickness for accurate determination of fission cross section ratio. The uncertainty was estimated by analyzing the correlation between the error sources. The correlation matrix between the measured data was given. The overall uncertainty of the present results is about 2%. For both nuclides, the present results agree well with those by Meadows and by Kuprijanov et al. The JENDL-3 evaluation generally has good agreement with the present results. However, the evaluated data are...