Abstract
A total of three measurement methods are presented for low-voltage cables characterization in the frequency band used for power line communication (9-500 kHz). In this paper, the cables are considered as composed of a set of simple transmission lines free from mutual coupling. The characteristic impedance and propagation constant as a function of the frequency have been assessed. In the first method, an LCR meter has been used to measure the input impedance of the cable, while the output is step-by-step short and open circuited. In the second method, a network analyzer in a reflection mode is used to measure the input impedance. The third method consists of measuring the scattering matrix (S-matrix) of the cable using a network analyzer. These measurement methods have been validated and compared using a well-known coaxial cable. In addition, the measurement reproducibility and the drift of the measuring devices are evaluated. Finally, two power low-voltage cable technologies, underground cable and overhead line twisted cable, are characterized by the most accurate method. The cables losses have been also investigated.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.