Measurement-Based 3-D Channel Modeling With Cluster-of-Scatterers Estimated Under Spherical-Wave Assumption

Abstract

With the rapid development of the sixth generation (6G) communication systems, the extremely large antenna arrays (ELAAs) have attracted substantial attention in both academia and industry. As the array size increases, the so-called “near-field” effect, i.e. channel parameters varying with respect to the antenna’s position becomes evident. Conventional channel models fail to describe such effects as the parameters of multipath components (MPCs) specified in these models are fixed regardless of array configuration. Due to the mismatch between the constant MPC assumption and the actual variant behavior observed, the parameterization of the models aiming to describe the spatial non-stationary channels cannot be conducted effectively. In order to mitigate the model mismatch and reproduce the channels with spatial non-stationarity specifically for ELAA applications, in this work, a novel measurement-based stochastic channel modeling method is proposed and applied to establishing Scatterer-based Spatial Channel Model (SSCM) that can be used to unify the far- and near-field models using spherical wave and generate the spatial non-stationary channels for ELAAs by integrating the traditional spatial channel model (SCM) with “clusters-of-scatterers (CoS)”. To establish the models based on measurements, the locations of first- and last-hop scatterers existing along propagation paths in a channel are estimated based on the spherical-wave assumption. A novel clustering algorithm is used to group the MPCs taking into account those scatterers’ locations. With a channel measurement campaign conducted using a 32×32 Rx planar antenna array at carrier frequency of 10 GHz, exemplary SSCMs are established. The SSCM is capable of reproducing the parts of the environment influencing wave propagation, and therefore can be used for the research of integrated sensing and communication (ISAC) applications.