Abstract
We propose a methodology to monitor the progressive saturation of a non-translucent unidirectional carbon fabric stack through its thickness by means of X-ray radiography and extract the dynamic saturation curves using image analysis. Four constant flow rate injections with increasing flow speed were carried out. These were simulated by a numerical two-phase flow model for both capillary and viscous leading flow conditions. The hydraulic functions describing pressure and relative permeability versus saturation were determined by fitting the saturation curves using a heuristic optimization routine. As the fluid velocity increases and the flow regime at the flow front shifts from capillary to hydrodynamically driven, the resulting capillary pressure curves for a given saturation level are shifted to higher values, from negative to positive. These as well as the capillary pressure calculated from the pressure drop within the unsaturated region of the fabric correlate well with a corresponding change in the averaged dynamic contact angle.
Published Version (
Free)
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Composites Part A: Applied Science and Manufacturing
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
