Abstract
Reflection characteristic is the law of specular and diffuse reflection after receives light of the surface, usually expressed by the ratio of irradiance of incident direction to the emissivity of observation direction, namely bidirectional reflection distribution function (BRDF). A method to measure BRDF for hole inner surface based on the endoscope image and morphology is proposed, which established the relationship between BRDF and morphology. Taking stainless steel and galvanized internal threaded as an example, the axial images in the holes are collected, and the BRDF of internal surface is calculated through the image brightness and the normal direction. The distribution characteristics of BRDF on the inner surface of different materials are analyzed. Based on the Phong model, the inBRDF parameter model of the inner surface is established. Research shows that the inBRDF model is consistent with measured results, and the average fitting error of the two materials is only 6.22%. The inBRDF method of hole inner surface proposed in this paper has high measurement efficiency and strong universality of equipment, and it is preferred to be applied on hole inner surface quality detection accordingly.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.