Abstract

Gasification of biomass in bubbling fluidized beds can be limited by accumulation of unconverted char particles during the process. The amount of unconverted biomass depends on the residence time of the fuel particles. This study demonstrates a method for measuring the biomass residence time over the conversion period at a given air flowrate and a given amount of biomass in a bubbling bed using the variation of bed temperature and fluid pressure recorded over time. The results show that biomass conversion is characterized by the devolatilization and extinction times. The two biomass residence times increase with decreasing air flowrate and increasing amount of biomass charged in the bed. The amount of unconverted char between the two characteristic times also increases with decreasing air flowrate and increasing biomass load. The total heat loss during the devolatilization is observed to increase with increasing air flowrate and amount of biomass in the bed. Correlations are proposed for predicting the mean biomass residence time, the amount of unconverted char particles and the devolatilization heat loss at a given operating condition. The results of this study can be used in determining the bubbling bed properties and solid circulation rate required to decongest the accumulated char particles in the bed.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.