Maximizing RDF recovery potential through the integration of electrical resistivity tomography and frequency-domain electromagnetic surveys for waste characterization in open dump mining

Abstract

Open dumping is a widespread waste management technique used in developing countries. This approach is simple and economical but has numerous environmental and health impacts. Open dump mining (ODM) can reduce waste in both open and controlled dumpsites by converting waste into refuse-derived fuel (RDF) for energy generation; however, before ODM implementation, the waste's characteristics and composition must be assessed. Geophysical surveys are widely used to characterize waste. The electrical resistivity tomography (ERT) method is a particularly common technique for determining waste composition, but it has several limitations. Therefore, a frequency-domain electromagnetic (FDEM) survey was used in this study as a pre-screening tool to evaluate the waste composition and overcome the limitations of ERT surveys. This study aimed to determine the relationship between geophysical data types (i.e., ERT and FDEM) and the optimal waste composition for RDF production and assess the ability of FDEM surveys to identify areas with RDF recovery potential. This study combined ERT and FDEM surveys with waste sample analysis in old/new controlled dumpsites in Thailand. The quantitative and qualitative correlations between the geophysical data (i.e., resistivity, conductivity, waste composition, and moisture content (MC)) were then assessed using linear and multiple linear regression analysis. Integrating geophysical surveys was found to have the potential to locate optimal RDF recovery areas, with low conductivity (0–100 mS/m) and high resistivity (>55 Ω·m) characteristics associated with areas of high RDF content (>40 % by weight). An unexpected finding was that increased waste age resulted in increased resistivity and decreased conductivity. Additionally, the MC depended on factors affecting spatial variability (e.g., precipitation and biodegradation). Overall, this study demonstrates that integrating ERT and FDEM surveys is a suitable pre-screening tool to evaluate waste characteristics and composition, mitigate ERT survey limitations, and improve waste investigation before ODM.