Maximizing Biomass Productivity and CO2 Biofixation of Microalga, Scenedesmus sp. by Using Sodium Hydroxide

Abstract

A series of experiments were carried out with three native strains of microalgae to measure growth rates, biomass, and lipid productivities. Scenedesmus sp. IMMTCC-6 had better biomass growth rate and higher lipid production. The growth, lipid accumulation, and carbon dioxide (CO2) consumption rate of Scenedesmus sp. IMMTCC-6 were tested under different NaOH concentrations in modified BBM. The algal strain showed the maximum specific growth rate (0.474/day), biomass productivity (110.9 mg l(-1) d(-1)), and CO2 consumption rate (208.4 mg l(-1) d(-1)) with an NaOH concentration of 0.005 M on the 8(th) day of cultivation. These values were 2.03-, 6.89-, and 6.88-fold more than the algal cultures grown in control conditions (having no NaOH and CO2). The CO2 fixing efficiency of the microalga with other alternative carbon sources like Na2CO3 and NaHCO3 was also investigated and compared. The optimized experimental parameters at shake-flask scale were implemented for scaling up the process in a self-engineered photobioreactor. A significant increase in lipid accumulation (14.23% to 31.74%) by the algal strain from the logarithmic to stationary phases was obtained. The algal lipids were mainly composed of C16/C18 fatty acids, and are desirable for biodiesel production. The study suggests that microalga Scenedesmus sp. IMMTCC-6 is an efficient strain for biodiesel production and CO2 biofixation using stripping solution of NaOH in a cyclic process.