Abstract

The Taupo Volcanic Zone (TVZ) hosts 23 geothermal fields, seven of which are currently utilised for power generation. Ngatamariki geothermal field (NGF) is one of the latest geothermal power generation developments in New Zealand (commissioned in 2013), located approximately 15 km north of Taupo. Samples of reservoir rocks were taken from the Tahorakuri Formation and Ngatamariki Intrusive Complex, from five wells at the NGF at depths ranging from 1354 to 3284 m. The samples were categorised according to whether their microstructure was pore or microfracture dominated. Image analysis of thin sections impregnated with an epoxy fluorescent dye was used to characterise and quantify the porosity structures and their physical properties were measured in the laboratory. Our results show that the physical properties of the samples correspond to the relative dominance of microfractures compared to pores. Microfracture-dominated samples have low connected porosity and permeability, and the permeability decreases sharply in response to increasing confining pressure. The pore-dominated samples have high connected porosity and permeability, and lower permeability decrease in response to increasing confining pressure. Samples with both microfractures and pores have a wide range of porosity and relatively high permeability that is moderately sensitive to confining pressure. A general trend of decreasing connected porosity and permeability associated with increasing dry bulk density and sonic velocity occurs with depth; however, variations in these parameters are more closely related to changes in lithology and processes such as dissolution and secondary veining and re-crystallisation. This study provides the first broad matrix permeability characterisation of rocks from depth at Ngatamariki, providing inputs for modelling of the geothermal system. We conclude that the complex response of permeability to confining pressure is in part due to the intricate dissolution, veining, and recrystallization textures of many of these rocks that lead to a wide variety of pore shapes and sizes. While the laboratory results are relevant only to similar rocks in the Taupo Volcanic Zone, the relationships they highlight are applicable to other geothermal fields, as well as rock mechanic applications to, for example, aspects of volcanology, landslide stabilisation, mining, and tunnelling at depth.

Highlights

  • New Zealand relies on geothermal energy to generate approximately 16.5% of its electricity (MBIE 2017)

  • Our data set is too small to provide any statistical quantification of these differences; these results demonstrate that sonic wave velocity reduction is less severe in samples with pore dominated compared to microfracture microstructure

  • The objective of this paper was to determine the controls on the intact physical properties of a range of volcanic geothermal reservoir rocks

Read more

Summary

Introduction

New Zealand relies on geothermal energy to generate approximately 16.5% of its electricity (MBIE 2017). Because porosity does not indicate the shape, size, and distribution of the voids, it provides limited information about the ability for a fluid to flow through the rock. Porosity includes both connected porosity and unconnected porosity. Permeability as defined by Henry Darcy in the mid-1800s applies to non-turbulent (Darcian) flow (Glassley 2010) It is scale dependent with distinct differences between macro- (metre scale fractures) and micro (matrix)-scale permeability (Heap and Kennedy 2016) and can be partially attributed to the random distribution of void structures throughout a rock mass (Glassley 2010)

Objectives
Methods
Results
Discussion
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call