Mathematical modelling of an intermittent anoxic/aerobic MBBR: Estimation of nitrification rates and energy savings

Abstract

This study aimed at modelling the performance of a novel MBBR configuration, named A/O-MBBR, comprised of a pre-anoxic reactor, with an HRT of 4.5 h, coupled with an intermittent anoxic/aerobic MBBR (HRT = 6.8 h). The lab-scale system was fed with municipal wastewater with an average influent Total Ammonia Nitrogen (TAN) and total COD (TCOD) concentrations of 46 mg of TAN-N L−1 and 310 mg TCOD L−1. During the whole experimental period, TAN removal efficiency was always higher than 96%; denitrification was also very effective, achieving nitrate and nitrite concentrations in the effluent both lower than 5 mg NOx-N L−1 on average. Moreover, TCOD average removal efficiency was equal to 85%. Modelling was performed to investigate the nitrification efficacy enhancement; to this aim, a biofilm model was developed, adopting the equations for mixed-culture biofilms and the Activated Model Sludge n°1 (ASM1) for the biological processes rates. The model allowed to determine the maximum uptake rate for autotrophic growth (μA was 2.5 d−1) and the semisaturation constant (KOA was 0.2 mg O2 L−1), suggesting that the nitrification process was 3-fold faster than average and very effective at low oxygen concentrations. The model estimated that about 85% of TAN was removed by the biofilm and only the remaining part by suspended biomass in the bulk liquid. Finally, it was assessed that the A/O-MBBR configuration allowed for a 45–60% savings of the energy requirement compared to a Benchmark WWTP layout.