Abstract
The drying features of apples at different infrared drying settings were investigated. The drying time, moisture-effective diffusion, and activation energy of infrared dried apples were measured experimentally and statistically as a function of slice thicknesses, radiation intensity, and air velocity. The infrared intensity of 0.225, 0.130, and 0.341W/cm2 , slice thicknesses of 6, 4, and 2mm, and airflow of 0.5, 1.0, and 1.5m/s were used to dry apple slices. The data shows that the drying time reduced as IR increased, but airflow and slice thickness increased. Eight statistical factors were used to compare 11 alternative mathematical drying models. The experimentally acquired drying curves were matched to the thin-layer drying equations. According to the calculations, the Midilli etal. equation had the greatest (efficiency and R2 ) and lowest (χ2 , sum of squared errors, standard error of estimate, standard error, standard deviation of difference) values. As a result, this equation is the best for modeling the drying curves of apple slices across all drying circumstances. The optimum moisture diffusivity value varied from 2.59 to 9.07 × 10-10 m2 /s. The mean activation energy was determined to be 19.02-29.83kJ/mol under various experimental conditions.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.