Abstract
A mathematical model of the regulator was developed; a scheme for its solution in the Matlab-Simulink environment was suggested; dependencies of the spool movement (x1), piston (x2), transition time (t) and other parameters on the pressure in the pressure line (p) have been determined. The mathematical model of the regulator establishes the effect of pressure on control process parameters. When the pressure increases from 30 to 45 MPa, the regulator spool moves at a distance varying from 0.4 - 2.8 mm. The spool movement is proportional to the pressure. The piston movement is more sensitive to the change in pressure. It changes within the range of 3–19 mm, while the relationship is non-linear. The cylidner pressure and the ratio of rocker arms are proportional to the pressure and increases 1.5 times; the transition time is expressed by a non-linear dependence and decreases two-fold.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
