Mathematical analysis of flow passing through a rectangular nozzle

Abstract

Practically speaking, fluid flow in round and noncircular nozzle is a very regular occurrence. The cold and hot water used in our homes is delivered to us via pipes. Water is delivered throughout the city via large pipe networks. Large pipelines carry natural gas and oil hundreds of kilometres from one place to another. During the operation of an engine, cooling water is carried by hoses to the radiator’s pipes, in which it is cooled as it travels. Experimentally, we detected the results of the model because there is no restriction on the application of experimental research to a certain sector or kind of concept. It may be used for a broad range of events and circumstances. Under parabolic velocity conditions, fluid (Water Pr 6.9) flows from the inlet position. The top and bottom walls of the rectangular nozzle are also moving at the same velocity as they are at the inlet position. Due to the movement of the walls, fluid is compressed in the particular region and also exhibits the same parabolic behavior. The solution of the coupled equations is determined by using the Finite Volume Method (FVM). When partial differential equations are expressed as algebraic equations, the FVM may be used to evaluate them. It can be used to evaluate elliptic, parabolic, and hyperbolic partial differential equations. Using FVM, it is necessary to know the values (and derivatives) of multiple variables at the cell faces, when the values (and derivatives) of these variables are only known at the cell centres. When determining these variables for convective terms, it is common to take the direction of the flow into consideration. The numerical results of the velocity and the pressure could be seen in the rectangular nozzle.