Mass transport and reaction in sulfonic acid resin catalyst: The dehydration of t‐butyl alcohol

Abstract

AbstractKinetics of the dehydration of t‐butyl alcohol to isobutylene were measured with a semibatch reactor containing liquid reactant and suspended particles of cation exchange resin catalyst [sulfonated copolymer of styrene and divinylbenzene (DVB)]. Effects on rate were determined for variations in temperature (58 to 76°C.), reactant water mole fraction (0.0005 to 0.10), and catalyst pacticle diameter (77 to 620 μ) and crosslinking (2 to 12% DVB).Nearly anhydrous t‐butyl alcohol failed to penetrate the shrunken network of the polymer. Reaction ebgan only on particle peripheries, and product water penetrated the gel network and s welled it to allow penetration of the alcohol. Rate consequently increased to a maximum (about 0.5 moles/min. equivalent of catalyst SO3H groups at 76°C.) and then decreased as water competed with reactant fro catalytic sites. A spherical catalyst particle is modeled as a shrinking cetrol core, free of reactant and water, and a swollen shell in which concent rations are independent of position and time. The model fits reaction rate and separate particle swelling data for 80 μ particles of catalyst containing 12% DVB, but it is increasingly inadequate for larger particles and catalysts of lower DVB contents.