Mass transfer of the multicomponent free jet and one numerical implementation on a graphic processing unit platform

Abstract

Jet flows are ubiquitous in nature and laboratories. For example, helium and argon jets into ambient air are commonly used to produce atmospheric plasma jets. The jets before and after discharge both are typical multicomponent flows. This study reports on the implementation of a numerical solver based on the graphic processing units to model multicomponent mixture gas flows. To this end, two- and three-dimensional Jacobian matrices for the multicomponent Euler equations were obtained to reconstruct numerical fluxes and build a total variation diminishing scheme. The two-dimensional early-stage mass transfer of gas jets was studied for three mixture gases: He/air, Ar/air, and N2/air to numerically verify the steady functioning of the numerical solver despite the high mass fraction gradients. The mass fraction distribution of helium in ambient air exhibited more complex substructures than those of argon and nitrogen in ambient air. Using the watershed method, self-generated bullets were extracted from the mass fraction distributions of the helium jet. The proposed numerical solver implemented in this study is expected to provide a better understanding of gas jet dynamics, and the Jacobian matrices can provide a mathematical foundation for constructing potential higher schemes.