Abstract
The theory of gas absorption accompanied by fast pseudo- mth order reaction was used to obtain values of effective interfacial area, a, in 20 and 38 cm i.d. packed columns which were operated co-currently (downflow). Values of a were obtained for 1 in. and 1.5 in. metal Pall rings; 1 in. stainless steel Pall rings, having length (height) to diameter ratio of 1.0, 0.75, and 0.5; 1 in and 1.5 in. ceramic Italox saddles; and stainless steel multifilament wire gauze type packing over a wide range of gas and liquid superficial velocities. The gas superficial velocity was varied from 30 to 255 cm/sec in the 20 cm i.d. column and 14 to 73 cm/sec in the 38 cm i.d. column. The liquid superficial velocity was varied from 0.2 to 3 cm/sec in the 20 cm i.d. column and 0.2 to 1 cm/sec in the 38 cm i.d. column. Different flow regimes, namely, trickle flow (film flow), pulse flow and transition from pulse to disperse flow, were covered. The values of a were found to be in the range of 0.6 to 2 cm 2/cm 3 for the trickle flow (film flow) regime, and 2.4–5 cm 2/cm 3 for the pulse flow regime. In the case of multifilament wire gauze packing (MFWGP) remarkably high values of a up to 16 cm 2/cm 3 were obtained in the pulse to disperse flow regime.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
