Abstract
AbstractModeling of non‐disperse solvent extraction of molybdenum(VI) with PC‐88A as extractant and a nanoporous hollow‐fiber membrane contactor as extractor was performed. Computational fluid dynamics was applied for modeling and simulation of molybdenum extraction. Concentration, pressure, and velocity distributions for molybdenum were determined. The extraction of Mo6+ was greatly influenced by the flow rate of feed solution. The extraction efficiency was reduced with higher feed flow rate and increased with the molybdenum content in the feed. The pressure drop along the shell side of the membrane extractor was found to be not significant, being one of the advantages of membrane extractors which assist in reducing the operational costs. The proposed simulation method is capable to prognosticate the performance of solvent extraction of molybdenum in membrane extractors.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
