Abstract
The gassed power demand and volumetric mass transfer coefficient (kLa) were investigated in a fully baffled, dished-base stirred vessel with a diameter of 0.30m agitated by five triple-impeller combinations. Six types of impellers (six-half-elliptical-blade disk turbine (HEDT), four-wide-blade hydrofoil impeller (WH) pumping down (D) and pumping up (U), parabolic-blade disk turbine (PDT), and CBY narrow blade (N) and wide blade (W)) were used to form five combinations identified by PDT+2CBYN, PDT+2CBYW, PDT+2WHD, HEDT+2WHD and HEDT+2WHU, respectively. The results show that the relative power demand of HEDT+2WHU is higher than that of other four impeller combinations under all operating conditions. At low superficial gas velocity (uG), kLa differences among impeller combinations are not obvious. However, when uG is high, PDT+2WHD shows the best mass transfer performance and HEDT+2WHU shows the worst mass transfer performance under all operating conditions. At high uG and a given power input, the impeller combinations with high agitation speed and big projection cross-sectional area lead to relatively high values of kLa. Based on the experimental data, the regressed correlations of gassed power number with Froude number and gas flow number, and kLa with power consumption and superficial gas velocity are obtained for five different impeller combinations, which could be used as guidance for industrial design.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
