Mass transfer coefficients in a pulsed packed extraction column

Abstract

The volumetric overall mass transfer coefficients have been measured in a pulsed packed extraction column using diffusion model for the toluene/acetone/water system. The experiments were carried out for both mass transfer directions. The effects of operational variables such as pulsation intensity and dispersed and continuous phases flow rates on volumetric overall mass transfer coefficients have been investigated. The experimental findings indicate that pulsation intensity and mass transfer direction have great influence on volumetric overall mass transfer coefficient. Significant, but weaker, are the effects of continuous and dispersed phase flow rates. The experimental results obtained in the present work are compared with some other types of extraction columns. Finally, two empirical correlations for prediction of the continuous phase overall mass transfer coefficient is derived in terms of Sherwood and Reynolds numbers. Good agreement between prediction and experiments was found for all operating conditions that were investigated.