Mass, height of burst, and source-receiver distance constraints on the acoustic coda phase delay method.

Abstract

This research uses the acoustic coda phase delay method to estimate relative changes in air temperature between explosions with varying event masses and heights of burst. It also places a bound on source-receiver distance for the method. Previous studies used events with different shapes, height of bursts, and masses and recorded the acoustic codas at source-receiver distances less than 1 km. This research further explores the method using explosions that differ in mass (by up to an order of magnitude) and are placed at varying heights. Source-receiver distances also cover an area out to 7 km. Relative air temperature change estimates are compared to complementary meteorological observations. Results show that two explosions that differ by an order of magnitude cannot be used with this method because their propagation times in the near field and their fundamental frequencies are different. These differences are expressed as inaccuracies in the relative air temperature change estimates. An order of magnitude difference in mass is also shown to bias estimates higher. Small differences in height of burst do not affect the accuracy of the method. An upper bound of 1 km on source-receiver distance is provided based on the standard deviation characteristics of the estimates.